LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2020 >> Acadia SL >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 9T50 (M3H), 9T60 (M3G) Or 9T65 (M3W M3V) - Repair Instructions - Off Vehicle >> Repair Instructions - Off Vehicle >> Control Valve Body Assembly Removal (With ETRS) >> Control Valve Solenoid Body Wiring Harness Removal

Control Valve Solenoid Body Wiring Harness Removal

GM4572649Courtesy of GENERAL MOTORS COMPANY
Control Valve Solenoid Body Wiring Harness Removal

Callout Component Name
1 Control Valve Body Bolt [3x]
2 Control Valve Solenoid Body Bolt
3 Automatic Transmission Wiring Harness

Procedure

  1. Ensure you disconnect all the connectors from the valve body.
  2. On-Vehicle the Variable Feed Solenoid Clutch Accumulator Piston and Spring may fall out. Control Valve Body Assembly Disassemble (With ETRS) 
NOTE:

The bolts are captured with harness.
4 Automatic Transmission Wiring Harness Seal
Procedure 
Remove and DISCARD the seal.
scientia non olet · About LEMON Manuals