LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2020 >> Acadia SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 457 (Automatic Transmission - 9T60 (M3G) Or 9T65 (M3W) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Input Shaft Support Overhaul >> Single Use Fasteners and Components

Single Use Fasteners and Components

WARNING: This page is about a different car, the 2023 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

3-5-Reverse and 4-5-6 Clutch Fluid Seal Ring [3x]

GM2552948Courtesy of GENERAL MOTORS COMPANY
NOTE: Callouts items in the following chart represent components shown in graphic above.
Callout Component Name
1 3-5-Reverse and 4-5-6 Clutch Fluid Seal Ring - Remove and DISCARD [3x]
NOTE:
2 Input Shaft Support Bolts M6 x 50 (Qty: 3)
CAUTION:

Refer to Fastener Caution .


Tighten 
12 N.m (106 lb in)
3 Input Shaft Support
NOTE:

Inspect the support for wear, damage or porosity.