Drive Sprocket, Driven Sprocket, and Drive Link Installation

WARNING: This page is about a different car, the 2023 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callouts items in the following chart represent components shown in graphic above.

Callout	Component Name
1	Driven Sprocket Bearing
2	Driven Sprocket NOTE: Install the drive link with the colored links and/or part number facing up. The drive link, drive, and driven sprocket assemblies must be installed at the same time. The driven sprocket ball bearing inner race has a slight interference fit with the case. Tap gently with the palm of a hand or a soft tip hammer to Install. The ball bearing should spin freely and smoothly.
3	Drive Link
4	Drive Sprocket
5	Drive Sprocket Retaining Ring
6	Drive Sprocket Thrust Washer