Installation Procedure

WARNING: This page is about a different car, the 2023 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

NOTE:
Before Install ing 1 - Reverse and 1 - 2 - 3 - 4 - 5 - 6 Clutch Piston Housing, check for proper operation. The 1 - Reverse Backing Plate should spin freely in one direction and lock in the other direction. A slight ratcheting noise may be heard when spinning in the free direction.

1 - Reverse and 1 - 2 - 3 - 4 - 5 - 6 Clutch Piston Housing (1) - Install
Make sure lube holes line up properly.