Disassemble Procedure
WARNING: This page is about a different car, the 2023 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
1-2-3-4-5-6 Clutch Backing Plate Retaining Ring (1) - Remove
- 1-2-3-4-5-6 Clutch Backing Plate (2) - Remove
- 1-2-3-4-5-6 Clutch Plate - Friction (3) - Remove [2x]
- 1-2-3-4-5-6 Clutch Plate (4) - Remove [2x]
- 1-2-3-4-5-6 Clutch Plate - Wave (5) - Remove
1-2-3-4-5-6 Clutch Spring Retaining Ring (1) - Remove
- 1-2-3-4-5-6 Clutch Piston Return Spring (2) - Remove
- Blow air in port (6) to release the 1 - 2 - 3 - 4 - 5 - 6 clutch piston (3) from the housing.
- 1-2-3-4-5-6 Clutch Piston (3) - Remove
- 1-2-3-4-5-6 Clutch Piston Inner Seal (4) - Remove and DISCARD
- 1-2-3-4-5-6 Clutch Piston Seal (5) - Remove and DISCARD
NOTE:
The 1 - Reverse Clutch Retaining Ring should not be removed from bottom. There are no serviceable parts.