X212 Front Floor Console Wiring Harness to Instrument Panel Wiring Harness

WARNING: This page is about a different car, the 2023 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY	Courtesy of GENERAL MOTORS COMPANY
Connector Part Information Harness Type: Front Floor Console Wiring Harness OEM Connector: 13597189 Service Connector: Service by Harness - See Part Catalog Description: 42-Way F 1.2, 2.8 Series (GY)	Connector Part Information Harness Type: Instrument Panel Wiring Harness OEM Connector: 33155179 Service Connector: 13597186 Description: 42-Way M 0.64, 2.8 Series (GY)

Terminal Part Information

Terminal Type ID	Terminated Lead	Diagnostic Test Probe	Terminal Removal Tool
I	Not required	J-35616-16 (L-GN)	No Tool Required
II	Not required	J-35616-35 (VT)	No Tool Required
III	Not required	J-35616-4A (PU)	No Tool Required
IV	13578908	J-35616-5 (PU)	J-38125-11A
V	19329836	J-35616-65B (L-BU)	J-38125-215A

Pin	Size	Color	Circuit	Terminal Type ID	Option	Function	Pin	Size	Color	Circuit	Terminal Type ID	Option
1	0.75	RD/GY	1342	III	KA1	Battery Positive Voltage	1	0.75	RD/GY	1342	IV	KA1
2	0.5	VT	2801	II	K4C	Retained Accessory Power Control	2	0.5	VT	2801	IV	K4C
3	0.35	BU/YE	6844	I	JHD	ABS/Traction Control Hill Descent Control Switch Signal	3	0.35	BU/YE	6844	V	JHD
4	0.35	GN/WH	111	I		Hazard Warning Switch Signal	4	0.35	GN/WH	111	V
5	0.35	GY/WH	3153	I	UGN/UEU	Lane Departure Warning Disable Switch Signal	5	0.35	GY/WH	3153	V	UEU/UGN
6	0.35	WH	3152	I	UGN/UEU	Lane Departure Warning Indicator Control	6	0.35	WH	3152	V	UEU/UGN
7	0.35	YE	6817	I		LED Backlight Dimming Control 1	7	0.35	YE	6817	V
8	0.35	BU/VT	1788	I		Traction Control Switch Signal 1	8	0.35	BU/VT	1788	V
9	0.35	GY/BK	3276	I		Immobilizer Control Module Control	9	0.35	GY/BK	3276	V
10	0.35	GN/GY	3277	I		Vehicle Anti-Theft System Immobilizer Low Reference	10	0.35	GN/GY	3277	V
11	0.35	GN/YE	7531	I		HVAC Control Module LIN Bus 1	11	0.35	GN/YE	7531	V
12	0.5	BK/WH	1551	I		Signal Ground	12	0.5	BK/WH	1551	V
13	0.35	WH	6816	I	URC	Indicator Dimming Control	13	0.35	WH	6816	V
14	-	-	-	-	-	Not Occupied	14	-	-	-	-	-
15	0.35	VT/GY	1039	I		Run/Crank Ignition 1 Voltage	15	0.35	VT/GY	1039	V
16	0.35	BK	1650	I		Ground	16	0.35	BK	1650	V
17	-	-	-	-	-	Not Occupied	17	-	-	-	-	-
18	0.75	VT	4601	I		Retained Accessory Power Control	18	0.75	VT	4601	V
19	0.35	RD/VT	340	I		Battery Positive Voltage	19	0.5	RD/VT	340	V
20	1.5	BK	1650	III		Ground	20	1.5	BK	1650	IV
21	1.5	VT	1001	III		Retained Accessory Power Ignition Voltage	21	1.5	VT	1001	IV
22	0.75	RD/YE	1442	III	KA1	Battery Positive Voltage	22	0.75	RD/YE	1442	IV	KA1
23	0.75	BK	1750	III	KA1	Ground	23	0.75	BK	1750	IV	KA1
24	-	-	-	-	-	Not Occupied	24	-	-	-	-	-
25	0.35	BU	1111	I		Stop/Start Switch Signal	25	0.35	BU	1111	V
26	0.35	GN	1110	I		Stop/Start Indicator Control	26	0.35	GN	1110	V
27 - 30	-	-	-	-	-	Not Occupied	27 - 30	-	-	-	-	-
31	0.35	RD/GN	1840	I	M3W/M3G	Battery Positive Voltage	31	0.75	RD/GN	1840	V	M3W/M3G
32	0.35	VT/GY	139	I	M3W/M3G	Run/Crank Ignition 1 Voltage	32	0.35	VT/GY	139	V	M3W/M3G
33	0.35	GN/VT	7533	I		Immobilizer LIN Bus 1	33	0.35	GN/VT	7533	V
34	0.35	GN/WH	7527	I	KA1	Human Machine Interface Control Module LIN Bus 1	34	0.35	GN/WH	7527	V	KA1
35	0.35	VT/YE	5526	I	M3G/M3W	Tap Up/Tap Down Switch Signal	35	0.35	VT/YE	5526	V	M3G/M3W
36 - 37	-	-	-	-	-	Not Occupied	36 - 37	-	-	-	-	-
38	0.75	BK	1750	I		Ground	38	0.75	BK	1750	V
39	-	-	-	-	-	Not Occupied	39	-	-	-	-	-
40	0.5	VT	2801	I		Retained Accessory Power Control	40	0.35	VT	2801	V
41 - 42	-	-	-	-	-	Not Occupied	41 - 42	-	-	-	-	-