LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2020 >> Acadia SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 165 (Automatic Transmission - 9T50 (M3H), 9T60 (M3G) Or 9T65 (M3W) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Front Mount Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2021 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the transmission mount (4).
    GM4707862Courtesy of GENERAL MOTORS COMPANY
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the transmission mount bolts (1, 2, 3) and tighten to 58 N.m (43 lb ft).
  3. Install the transmission mount through bolt (1) and tighten to 100 N.m (74 lb ft).
    GM4707737Courtesy of GENERAL MOTORS COMPANY
  4. Remove the jack from the transmission.
  5. Lower the vehicle. Lifting and Jacking the Vehicle
scientia non olet · About LEMON Manuals