Installation Procedure
WARNING: This page is about a different car, the 2021 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
- Control Valve Body Cover (3) - Install - Control Valve Body Cover Installation
- Electrical Connector (1) - Connect
- Position the transmission wiring harness with brackets (3) as necessary.NOTE:
Wiring harness not shown for graphic clarity.
- Engine Wiring Harness Transmission Clip Nut (2) - Install and tighten [2x] 9 N.m (80 lb in)
- Wiring Harness Retainer (1) - Install [2x]
- Battery Tray - Install - Battery Tray Replacement
- Fill the transmission to the proper level with NEW transmission fluid.
CAUTION:
Refer to Fastener Caution .