LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2020 >> Acadia SL >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Diagnostic Information and Procedures >> DTC C05BB >> Circuit/System Verification

Circuit/System Verification

  1. Ignition - On / Vehicle - In Service Mode
  2. Perform the configuration/reset function: Brake System Plunger Motor Position Sensor Learn
  3. Verify DTC C05BB is not set.
    • If the DTC sets 

      Replace the component: A104 Brake Master Cylinder

    • Go to next step: If the DTC is not set 
  4. All OK.
scientia non olet · About LEMON Manuals