LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2020 >> Acadia AT4 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 9T50 (M3H), 9T60 (M3G) Or 9T65 (M3W M3V) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Transmission Mount Strut Bracket Replacement (Front Wheel Drive) >> Installation Procedure

Installation Procedure

  1. Position the transmission mount bracket (2) to the transmission.
  2. GM4289994Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    CAUTION:

    Refer to TORQUE-TO-YIELD FASTENER CAUTION .

    Install the three NEW transmission mount bracket to transmission bolts (1) and tighten to 100 N.m (74 lb ft) plus 45 to 60 degrees.

  3. GM4729017Courtesy of GENERAL MOTORS COMPANY

    Install the transmission mount to bracket through bolt (1). Transmission Mount Strut Replacement (Front Wheel Drive) 

scientia non olet · About LEMON Manuals