LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2020 >> Acadia AT4 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 9T50 (M3H), 9T60 (M3G) Or 9T65 (M3W M3V) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Control Valve Body Cover Replacement (6 Cylinder) >> Removal Procedure

Removal Procedure

  1. Battery Tray - Remove - Battery Tray Replacement
  2. GM4674675Courtesy of GENERAL MOTORS COMPANY

    Electrical Connector (1) - Disconnect

  3. GM5342134Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Wiring harness not shown for graphic clarity.

    Wiring Harness Retainer (1) - Remove [2x]

  4. Engine Wiring Harness Transmission Clip Nut (2) - Remove [2x]
  5. Remove the transmission wiring harness with brackets (3) and reposition as necessary.
  6. GM4375387Courtesy of GENERAL MOTORS COMPANY

    Control Valve Body Cover (3) - Remove - Control Valve Body Cover Removal