LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2020 >> Acadia AT4 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 9T50 (M3H), 9T60 (M3G) Or 9T65 (M3W M3V) - Repair Instructions - Off Vehicle >> Repair Instructions - Off Vehicle >> Drive and Driven Sprocket, Drive Link, and Park Pawl Removal >> Drive Sprocket, Driven Sprocket, and Drive Link Removal

Drive Sprocket, Driven Sprocket, and Drive Link Removal

GM4375413Courtesy of GENERAL MOTORS COMPANY
Drive Sprocket, Driven Sprocket, and Drive Link Removal

Callout Component Name
1 Drive Sprocket Thrust Washer
2 Drive Sprocket Retaining Ring
3 Driven Sprocket

Procedure

  1. The driven sprocket (3), drive sprocket (5), and drive link (4) must be removed at the same time.
  2. The driven sprocket (3) ball bearing inner race has a slight interference fit with the case. Pull straight up to ease removal.
4 Drive Link
5 Drive Sprocket
6 Driven Sprocket Bearing
NOTE:

The driven sprocket (3) bearing may be stuck to the driven sprocket.
scientia non olet · About LEMON Manuals