LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2020 >> Acadia AT4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 457 (Automatic Transmission - 9T60 (M3G) Or 9T65 (M3W) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Transmission Fluid Pump, Front Differential Carrier Baffle, and Front Differential Ring Gear Removal >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2023 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4382296Courtesy of GENERAL MOTORS COMPANY

    Front Differential Carrier Baffle Bolt (1) - Remove [2x]

  2. Front Differential Carrier Baffle (2) - Remove
  3. NOTE:

    Note the direction of the taper to ensure proper Installation.

  4. Front Differential Rear Gear Retainer (3) - Remove
  5. Front Differential Ring Gear (4) - Remove
  6. Automatic Transmission Fluid Pump Cover BoltM6 x 25 (5) - Remove and DISCARD [19x]
  7. Automatic Transmission Fluid Pump Cover BoltM6 x 32 (6) - Remove and DISCARD [22x]
  8. Automatic Transmission Fluid Pump (7) - Remove
  9. Automatic Transmission Fluid Pump Ball Check Valve (8) - Remove
  10. Auxiliary Control Valve Body Spacer Plate (9) - Remove and DISCARD
  11. Driven Sprocket Thrust Washer (10) - Remove
  12. Drive Link Lubricant Fluid Seal (11) - Remove and DISCARD