LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2020 >> Acadia AT4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 457 (Automatic Transmission - 9T60 (M3G) Or 9T65 (M3W) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Manual Shift Shaft Seal Installation >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2023 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4378861Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    When Install ing the seal, ensure the seal lip is firmly seated against the case bore surface. Do not allow the seal lip to be crushed, or a leak may result.

    NOTE:

    Install a NEW seal. Do NOT reuse the old seal.

    Using DT-49101  Seal installer (2) Install the NEW manual shift shaft seal (1).

scientia non olet · About LEMON Manuals