LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2020 >> Acadia AT4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 457 (Automatic Transmission - 9T60 (M3G) Or 9T65 (M3W) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Control Valve Body Assembly Installation (With ETRS) >> Fluid Transfer Pipe Installation

Fluid Transfer Pipe Installation

WARNING: This page is about a different car, the 2023 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
GM5045329Courtesy of GENERAL MOTORS COMPANY
NOTE: Callouts items in the following chart represent components shown in graphic above.
Fluid Transfer Pipe Installation

Callout Component Name
1 Fluid Transfer Pipe Seal
Procedure 
Install NEW seals. Do NOT reuse old seals.
2 Fluid Transfer Pipe
CAUTION:

Refer to Fastener Caution .


Tighten 
9 N.m (80 lb in)