LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2020 >> Acadia AT4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 165 (Automatic Transmission - 9T50 (M3H), 9T60 (M3G) Or 9T65 (M3W) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Mount Strut Bracket Replacement (FWD) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2021 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the transmission mount bracket (2) to the transmission.
  2. Install the three NEW transmission mount bracket to transmission bolts (1) and tighten to 100 N.m (74 lb ft) plus 45 to 60 degrees.
    GM4289994Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    CAUTION:

    Refer to Torque-to-Yield Fastener Caution .

  3. Install the transmission mount to bracket through bolt (1). Transmission Mount Strut Replacement (FWD) 
    GM4729017Courtesy of GENERAL MOTORS COMPANY
scientia non olet · About LEMON Manuals