LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2020 >> Acadia AT4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 165 (Automatic Transmission - 9T50 (M3H), 9T60 (M3G) Or 9T65 (M3W) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Control Valve Body Cover Replacement (LGX) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2021 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Battery Tray - Remove - Battery Tray Replacement
  2. Electrical Connector (1) - Disconnect
    GM4674675Courtesy of GENERAL MOTORS COMPANY
  3. Wiring Harness Retainer (1) - Remove [2x]
    GM5342134Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Wiring harness not shown for graphic clarity.

  4. Engine Wiring Harness Transmission Clip Nut (2) - Remove [2x]
  5. Remove the transmission wiring harness with brackets (3) and reposition as necessary.
  6. Control Valve Body Cover (3) - Remove - Control Valve Body Cover Removal
    GM4375387Courtesy of GENERAL MOTORS COMPANY
scientia non olet · About LEMON Manuals