LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2020 >> Acadia AT4 >> Repair and Diagnosis >> Electrical >> Wiring Diagrams >> Component Connector End Views (K20 (X3)-K47 (X1)) >> Component Connector End Views >> K29F Seat Heating Control Module - Front X2 (KA1)

K29F Seat Heating Control Module - Front X2 (KA1)

GM1653409Courtesy of GENERAL MOTORS COMPANY
Connector Part Information
  • Harness Type: Passenger Seat
  • OEM Connector: 7283-9076-30
  • Service Connector: Service by Harness - See Part Catalog
  • Description: 16-Way F 0.64 Kaizen Series (BK)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool
I Not required J-35616-64B (LT BU) No Tool Required
Pin Size Color Circuit Function Terminal Type ID Option
1 0.35 BK/YE 2080 Driver Heated Seat Thermistor Low Reference I -
2 0.35 BK/GY 2435 Co-Driver Heated Seat Thermistor Low Reference I -
3 0.35 BU 2425 Driver Seat Back Heating Temperature Sensor Signal I KA1
4 0.35 WH/BU 2436 Passenger Seat Back Heating Temperature Sensor Signal I KA1
5 0.35 WH/GY 2434 Passenger Seat Heating Temperature Sensor Signal I -
6 0.35 YE/GY 2079 Driver Seat Heating Temperature Sensor Signal I -
7 - - - Not Occupied - -
8 0.35 GN/BU 6133 Body Control Module LIN Bus 2 I KA1/KU9
9 0.35 GN/VT 5906 Driver Seat Blower Motor Control 1 I KU9
10 0.35 VT/WH 5908 Passenger Seat Blower Motor Control 1 I -
11 - - - Not Occupied - -
12 0.35 BK/GN 2482 Co-Driver Heated Back Thermistor Low Reference I -
13 - 16 - - - Not Occupied - -