LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2020 >> Acadia AT4 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Diagnostic Information and Procedures >> DTC B3006 >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify the scan tool body control module Hood Position parameter is Open with the hood open and Closed with the hood closed
    • If the parameter does not change 

      Refer to Circuit/System Testing.

    • Go to next step: If the parameter changes 
  3. All OK.
scientia non olet · About LEMON Manuals