LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2020 >> Acadia AT4 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console Trim >> Repair Instructions >> Front Floor Console Trim Plate Replacement (Holden) >> Installation Procedure

Installation Procedure

  1. GM4393979Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connectors.

  2. Front Floor Console Trim Plate (1) - Reposition
  3. GM5020561Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    The ride control switch must be plugged in before installing the front floor console accessory trim plate.

    Front Floor Console Accessory Trim Plate (2) - Install

    4. CAUTION:

    Refer to Fastener Caution .

  4. Front Floor Console Bolt (1) - Install and tighten [4x] 1 N.m (9 lb in)
  5. GM4393675Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Trim Plate (1) - Install

  6. Carefully guide the front floor console pins into the instrument panel assembly.
  7. GM4446766Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Retainer Bolt (2) - Install and tighten [5x] 9 N.m (80 lb in)

  8. Front Floor Console Bolt Access Hole Cover (1) - Install
  9. GM4446760Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Retainer Bolt (2) - Install and tighten [5x] 9 N.m (80 lb in)

  10. Front Floor Console Bolt Access Hole Cover (1) - Install
  11. GM4356302Courtesy of GENERAL MOTORS COMPANY

    Transmission Control Lever Knob (3) - Install

  12. GM4382579Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Extension Panel - Right Side (3) - Install - Front Floor Console Extension Panel Replacement - Right Side (Holden)

  13. GM4382575Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Extension Panel - Left Side (3) - Install - Front Floor Console Extension Panel Replacement - Left Side (Holden)

scientia non olet · About LEMON Manuals