LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2020 >> Acadia AT4 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console Trim >> Repair Instructions >> Front Floor Console Trim Plate Replacement (GMC) >> Installation Procedure

Installation Procedure

  1. GM5354386Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connectors.

  2. Front Floor Console Trim Plate (1) - Install
  3. Carefully guide the front floor console pins into the instrument panel.
  4. GM5358877Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    Front Floor Console Retainer Bolt (2) - Install and tighten [5x] 9 N.m (80 lb in)

  5. Front Floor Console Bolt Access Hole Cover (1) - Install
  6. GM5358874Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Retainer Bolt (2) - Install and tighten [5x] 9 N.m (80 lb in)

  7. Front Floor Console Bolt Access Hole Cover (1) - Install
  8. GM5346450Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Extension Panel - Right Side (3) - Install - Front Floor Console Extension Panel Replacement - Right Side (GMC) 

  9. GM5344324Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Extension Panel - Left Side (2) - Install - Front Floor Console Extension Panel Replacement - Left Side (GMC) 

  10. GM5344321Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Side Trim Panel (1) - Install - Front Floor Console Side Trim Panel Replacement (GMC)