Quarter Upper Trim Panel Replacement

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Disable the SIR system. SIR Disabling and Enabling Fold the rear seat forward. Remove the rear seat belt retractor bolt on the side of the trim panel being replaced. Rear Seat Belt Retractor Replacement
1	Quarter Window Trim Finish Panel Bolt Cap
2	Quarter Window Trim Finish Panel Bolt CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
3	Quarter Upper Trim Panel NOTE: Use a flat bladed plastic trim tool. Procedure Disconnect the electrical connector. Enable the SIR System. SIR Disabling and Enabling