M130B Exhaust Camshaft Profile Actuator 2
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool |
|---|---|---|---|
| I | Not required | J-35616-12 (BU) | No Tool Required |
| II | Not required | J-35616-16 (L-GN) | No Tool Required |
| III | Not required | No Tool Required | No Tool Required |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 0.5 | YE / VT | 6265 | Camshaft Exhaust Stepper Cylinder 2 Rear Solenoid Control | II | - |
| 2 | 0.5 0.5 |
GY / VT GN / BK |
6266 6266 |
Camshaft Exhaust Stepper Cylinder 2 Position Signal Camshaft Exhaust Stepper Cylinder 2 Position Signal |
II III |
L3B LSY |
| 3 | 0.5 | BK / YE | 548 | Engine Control Sensors Low Reference 1 | I | - |
| 4 | 0.5 | BU / RD | 460 | Engine Control Sensors 5 Volt Reference 1 | II | - |
| 5 | 0.5 | VT / BU | 5293 | Powertrain Main Relay Fused Supply Voltage 4 | II | - |
| 6 | 0.5 | VT / BK | 6264 | Camshaft Exhaust Stepper Cylinder 2 Front Solenoid Control | II | - |