X125 Forward Lamp Wiring Harness to Body Wiring Harness (KL9)

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY	Courtesy of GENERAL MOTORS COMPANY
Connector Part Information Harness Type: Forward Lamp Wiring Harness OEM Connector: 13836614 Service Connector: 13395410 Description: 58-Way F 1.6, 2.8, 4.8 Timer Series (GY)	Connector Part Information Harness Type: Body Wiring Harness OEM Connector: 35456319 Service Connector: 13541395 Description: 58-Way M 1.6, 2.8, 5.8 Timer Series (GY)

Terminal Part Information

Terminal Type ID	Terminated Lead	Diagnostic Test Probe	Terminal Removal Tool
I	13575860	J-35616-4A (PU)	J-38125-36
II	13582280	J-35616-33 (YE)	EL-38125-560A
III	19368302	J-35616-40 (BU)	J-38125-36
IV	13575574	J-35616-5 (PU)	J-38125-215A
V	13575593	J-35616-34 (YE)	EL-38125-560A
VI	19368242	J-35616-32 (OG)	J-38125-36

Pin	Size	Color	Circuit	Terminal Type ID	Option	Function	Pin	Size	Color	Circuit	Terminal Type ID	Option
1	0.5	VT / GN	439	II	-	Run/Crank Ignition 1 Voltage	1	0.5	VT / GN	439	V	-
2	-	-	-	-	-	Not Occupied	2	-	-	-	-	-
3	0.5	GN / GY	465	II	-	Fuel Pump Primary Relay Control	3	0.5	GN / GY	465	V	-
4	-	-	-	-	-	Not Occupied	4	-	-	-	-	-
5	0.35	BK / OG	5045	II	-	Left Front Impact Discriminating Sensor Low Reference	5	0.35	BK / OG	5045	V	-
6	0.35	OG / YE	354	II	-	Left Front Impact Discriminating Sensor Signal	6	0.35	OG / YE	354	V	-
7	-	-	-	-	-	Not Occupied	7	-	-	-	-	-
8	0.35	YE / WH	1161	II	-	Accelerator Pedal Position Signal 1	8	0.5	YE / WH	1161	V	-
9	0.35	GN / WH	1162	II	-	Accelerator Pedal Position Signal 2	9	0.5	GN / WH	1162	V	-
10	0.35	WH / RD	1164	II	-	Accelerator Pedal Position 5V Reference 1	10	0.5	WH / RD	1164	V	-
11	0.75	GY / BU	1113	II	-	Left Front Shock Absorber Actuator Control	11	0.75	GY / BU	1113	V	-
12	0.75	BN / WH	1107	II	-	Left Front Shock Absorber Actuator Control	12	0.75	BN / WH	1107	V	-
13	0.5	VT / GN	4320	I	-	Powertrain Sensor Bus Enable	13	0.5	VT / GN	4320	IV	-
14	-	-	-	-	-	Not Occupied	14	-	-	-	-	-
15	0.35	BK / VT	1272	II	-	Accelerator Pedal Position Low Reference 2	15	0.35	BK / VT	1272	V	-
16	0.35	BN / RD	1274	II	-	Accelerator Pedal Position 5V Reference 2	16	0.35	BN / RD	1274	V	-
17	0.35	BK / BU	1271	II	-	Accelerator Pedal Position Low Reference 1	17	0.35	BK / BU	1271	V	-
18	0.35	BK / BN	1099	II	-	Left Front Vertical Suspension Acceleration Sensor Low Reference	18	0.5	BK / BN	1099	V	-
19	-	-	-	-	-	Not Occupied	19	-	-	-	-	-
20	0.35	GN / YE	1616	II	-	Rear Brake Pad Wear Sensor Signal	20	0.35	GN / YE	1616	V	-
21 - 22	-	-	-	-	-	Not Occupied	21 - 22	-	-	-	-	-
23	2.5	GY	4368	I	-	Right Park Brake Motor Low Reference	23	2.5	GY	4368	IV	-
24	2.5	GN / VT	1988	I	-	Right Park Brake Motor Apply Control	24	2.5	GN / VT	1988	IV	-
25 - 32	-	-	-	-	-	Not Occupied	25 - 32	-	-	-	-	-
33	2.5	GY / BK	4369	I	-	Left Park Brake Motor Low Reference	33	2.5	GY / BK	4369	IV	-
34	4	RD / YE	2172	III	-	12V Regulated Supply Voltage 1	34	4	RD / YE	2172	VI	-
35 - 36	-	-	-	-	-	Not Occupied	35 - 36	-	-	-	-	-
37	0.5	YE / BK	625	II	-	Starter Enable Relay Control	37	0.5	YE / BK	625	V	-
38	0.5	VT / BK	2139	II	-	Run/Crank Ignition 1 Voltage	38	0.35	VT / BK	2139	V	-
39 - 43	-	-	-	-	-	Not Occupied	39 - 43	-	-	-	-	-
44	2.5	WH	2001	I	-	Left Park Brake Motor Apply Control	44	2.5	WH	2001	IV	-
45	-	-	-	-	-	Not Occupied	45	-	-	-	-	-
46	0.35	WH	4986	II	-	AUTOSAR CAN Bus [-] 1 Serial Data	46	0.35	WH	4986	V	-
47	0.35	BU	4987	II	-	AUTOSAR CAN Bus [+] 1 Serial Data	47	0.35	BU	4987	V	-
48 - 49	-	-	-	-	-	Not Occupied	48 - 49	-	-	-	-	-
50	0.35	BU / YE	4979	II	-	AUTOSAR CAN Bus [+] 2 Serial Data	50	0.35	BU / YE	4979	V	-
51	0.35	WH	4978	II	-	AUTOSAR CAN Bus [-] 2 Serial Data	51	0.35	WH	4978	V	-
52	-	-	-	-	-	Not Occupied	52	-	-	-	-	-
53	0.35	WH	1100	II	-	Left Front Vertical Suspension Acceleration Sensor Signal	53	0.5	WH	1100	V	-
54	0.35	YE / RD	1817	II	-	Left Front Vertical Suspension Acceleration Sensor Voltage Reference	54	0.35	YE / RD	1817	V	-
55 - 58	-	-	-	-	-	Not Occupied	55 - 58	-	-	-	-	-