X107 Engine Wiring Harness to Knock Sensor Jumper Wiring Harness
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of GENERAL MOTORS COMPANY
|
 Courtesy of GENERAL MOTORS COMPANY
|
Connector Part Information
- Harness Type: Engine Wiring Harness
- OEM Connector: 13782480
- Service Connector: 13577534
- Description: 2-Way F 1.5 MX Series, Sealed (BK)
|
Connector Part Information
- Harness Type: Knock Sensor Jumper Wiring Harness
- OEM Connector: Not Available
- Service Connector: Service by Harness - See Part information
- Description: 2-Way M (BK)
|
Terminal Part Information
| Terminal Type ID |
Terminated Lead |
Diagnostic Test Probe |
Terminal Removal Tool |
| I |
Not required |
J-35616-14 (GN) |
No Tool Required |
| II |
Not required |
No Tool Required |
No Tool Required |
| Pin |
Size |
Color |
Circuit |
Terminal Type ID |
Option |
Function |
Pin |
Size |
Color |
Circuit |
Terminal Type ID |
Option |
| 1 |
0.5 |
WH / GY |
1876 |
I |
- |
Knock Sensor 2 Signal |
1 |
0.5 |
WH / GY |
1876 |
II |
- |
| 2 |
0.5 |
BK / GY |
2303 |
I |
- |
Knock Sensor Low Reference 2 |
2 |
0.5 |
BK / GY |
2303 |
II |
- |