Removal Procedure
Heater and Air Conditioning User Interface Control(1) - Remove - Heater and Air Conditioning User Interface Control Replacement (Equinox)Heater and Air Conditioning User Interface Control Replacement (Terrain)
Radio Control Bracket Bolt(1) - Remove[2x]
Radio Control Assembly (1) - Remove
- Use a plastic trim tool if necessary.
- Disconnect all electrical connectors.
Radio Control Bracket Bolt(1) - Remove[4x]
- Radio Control Bracket(2) - Remove
Instrument Panel Upper Compartment Bolt(1) - Remove[4x]
- Release the retaining tabs.
- Instrument Panel Radio Front Trim Plate(2) - Remove
Radio Control Bolt(1) - Remove[4x]
- Driver Information Display(2) - Remove