LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2019 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Automatic Transmission - 6T50 (M2D) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Control Replacement (With Base)

Transmission Control Replacement (With Base)

WARNING: This page is about a different variant/trim than selected.
GM4356390Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Remove the front floor console trim plate. Front Floor Console Trim Plate Replacement
  2. Remove the left front floor console side trim panel. Front Floor Console Extension Panel Replacement - Left Side
  3. WARNING:

    After installing the transmission range selector shift cable, pull up and push down on ALL connections to verify that the connections are fully seated and properly engaged. Failure to perform this task can result in the vehicle not being able to shift into PARK causing potential vehicle damage and bodily injury.

  4. Disconnect the range selector lever cable. Range Selector Lever Cable Replacement
  5. Disconnect the transmission control electrical connectors.
1 Transmission Control Fasteners[4x]
CAUTION:

Refer to Fastener Caution .


Tighten 
9 N.m (80 lb in).
2 Transmission Control