Actions Taken When the DTC Sets

WARNING: This page is about a different variant/trim than selected.

DTCs listed in the DTC Descriptor Category = Type A DTC - Additional actions taken:

Grade braking = Disabled
Line Pressure Command = Maximum
Manual Shift Control = Disabled
Mode Switch = Disabled
Neutral Idle Mode = Disabled
Powertrain braking = Disabled
{ P0796 } Transmission gear allowed = 3rd Gear
{ P0797 } Transmission gear allowed = 4th Gear
{ P0797 } Torque Management = Active
Transmission Adaptive Pressure Control = Freeze current adapt values