Actions Taken When the DTC Sets
WARNING: This page is about a different variant/trim than selected.
DTCs listed in the DTC Descriptor Category = Type A DTC - Additional actions taken:
- Grade braking = Disabled
- Line Pressure Command = Maximum
- Manual Shift Control = Disabled
- { If equipped } Mode Switch = Disabled
- { If equipped } Neutral Idle Mode = Disabled
- Powertrain braking = Disabled
- Transmission Adaptive Pressure Control = Freeze current adapt values
- { P0776 } Transmission gear allowed = 2nd Gear or Neutral
- { P0777 } Transmission gear allowed = 3rd Gear