Removal Procedure
Front Floor Console Extension Panel - Left Side (3) - Remove - Front Floor Console Extension Panel Replacement - Left Side
Front Floor Console Extension Panel - Right Side (3) - Remove - Front Floor Console Extension Panel Replacement - Right Side
Transmission Control Lever Knob (3) - Remove - Transmission Control Lever Knob Replacement
Front Floor Console Cup Holder Liner (1) - Remove
- Front Floor Console Trim Plate Bolt (2) - Remove [2x]
Front Floor Console Trim Plate (1) - Remove - Front Floor Console Trim Plate Replacement
Front Floor Console (1) - Remove - Front Floor Console Replacement
Instrument Panel Extension (1) - Remove - Instrument Panel Extension Replacement
Radio Front Speaker (2) - Remove - Radio Front Speaker Replacement
Radio Front Center Speaker (2) - Remove - Radio Front Center Speaker Replacement
Forward Collision Alert Display (2) - Remove - Forward Collision Alert Display Replacement
Steering Column (1) - Remove - Steering Column Replacement (GMC with N37) , or Steering Column Replacement (GMC with N38) , or Steering Column Replacement (Holden with N37)
Instrument Panel Trim Plate (2) - Remove - Instrument Panel Trim Plate Replacement (IOB)
Instrument Panel Cluster Trim Plate (1) - Remove - Instrument Panel Cluster Trim Plate Replacement
Instrument Cluster (2) - Remove - Instrument Cluster Replacement
Instrument Panel Trim Plate Applique (1) - Remove - Instrument Panel Trim Plate Applique Replacement
Instrument Panel Compartment (1) - Remove - Instrument Panel Compartment Replacement
Instrument Panel Bolt (1) - Remove [6x]
Instrument Panel Bolt (1) - Remove [12x]
Instrument Panel Bolt (1) - Remove [3x]
Instrument Panel Airbag Bolt (1) - Remove [3x]
- NOTE:
Note the location and routing of the instrument panel electrical harness assembly, to ensure proper reinstallation.
Disconnect the fasteners securing the instrument panel electrical harness assembly to the instrument panel assembly (1) and position out of the way.
- With the aid of an assistant lift the instrument panel assembly (1) rearward and upward from the tie bar assembly.
- Remove the instrument panel assembly (1) from the vehicle.
- Transfer all necessary components.