LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2019 >> Acadia Denali, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console Trim >> Repair Instructions >> Front Floor Console Trim Plate Replacement >> Removal Procedure

Removal Procedure

  1. GM4382575Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Extension Panel - Left Side (3) - Remove - Front Floor Console Extension Panel Replacement - Left Side 

  2. GM4382579Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Extension Panel - Right Side (3) - Remove - Front Floor Console Extension Panel Replacement - Right Side 

  3. GM4356302Courtesy of GENERAL MOTORS COMPANY

    Transmission Control Lever Knob (3) - Remove - Transmission Control Lever Knob Replacement

  4. GM4446760Courtesy of GENERAL MOTORS COMPANY

    Use a suitable tool to release the front floor console bolt access hole cover (1) from the front floor rear console side trim panel.

  5. Front Floor Console Retainer Bolt (2) - Remove [5x]
  6. GM4446766Courtesy of GENERAL MOTORS COMPANY

    Use a suitable tool to release the front floor console bolt access hole cover (1) from the front floor rear console side trim panel.

  7. Front Floor Console Retainer Bolt (2) - Remove [5x]
  8. Slide the front floor console back to clear the pins from the instrument panel assembly.
  9. GM4393675Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retainer clips.

  10. Start at the rear of the front floor console trim plate (1) and work your way forward.
  11. GM5020561Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Bolt (1) - Remove [4x]

  12. Front Floor Console Accessory Trim Plate (2) - Remove
  13. GM4393979Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Trim Plate (1) - Remove

  14. Disconnect the electrical connectors.
  15. Transfer components as necessary.
scientia non olet · About LEMON Manuals