Removal Procedure
Front Floor Console Extension Panel - Left Side (3) - Remove - Front Floor Console Extension Panel Replacement - Left Side
Front Floor Console Extension Panel - Right Side (3) - Remove - Front Floor Console Extension Panel Replacement - Right Side
Transmission Control Lever Knob (3) - Remove - Transmission Control Lever Knob Replacement
- NOTE:
Some vehicles maybe equipped with two fasteners under the cup holder liner.
Front Floor Console Cup Holder Liner (1) - Remove
- { If equipped } Front Floor Console Trim Plate Bolt (2) - Remove [2x]
Use a suitable tool to release the front floor console bolt access hole cover (1) from the front floor rear console side trim panel.
- Front Floor Console Retainer Bolt (2) - Remove [5x]
Disconnect the transmission range selector lever cable terminal (2) from the shift lever pin.
- Release the transmission range selector lever cable retainer (1) and remove the transmission range selector cable from the transmission control lever base.
Use a suitable tool to release the front floor console bolt access hole cover (1) from the front floor rear console side trim panel.
- Front Floor Console Retainer Bolt (2) - Remove [5x]
- Slide the front floor console back to clear the pins from the instrument panel assembly.
Use a flat bladed plastic trim tool.
- Start at the rear of the front floor console trim plate (1) and work your way forward.
Front Floor Console Bolt (1) - Remove [4x]
- Front Floor Console Accessory Trim Plate (2) - Remove and position aside
Front Floor Console Trim Plate (1) - Remove
- Disconnect the electrical connectors.
Disconnect the electrical connectors.
- Slide the front floor console (1) back to clear the pins from the instrument panel assembly.
- With the aid of an assistant, left and remove the front floor console assembly (1) from the vehicle.
- Transfer components as necessary.