Conditions for Running the DTC

P1516

• DTC P0606, P1682 = Not set
• Ignition Voltage = Greater than 6.4 V
• Reduced Engine Power = Not Activated
• Desired Throttle Position = Steady State - For greater than 4 s

DTC runs continuously when the above conditions are met.

P2101 Condition 1

• DTC P0606, P1682 = Not set
• Ignition Voltage = Greater than 6.4 V
• Reduced Engine Power = Not Activated
• Engine = Running

Condition 2

• Engine = Not Running
• Ignition Voltage = Greater than 8.4 V
• Throttle Position = Learned
• Throttle Actuator Control System = Active
• Battery Saver Mode = Not Activated

DTC runs continuously when the above conditions are met.

P2119

• DTC P0122, P0123, P0222, P0223, P06A3 = Not set
• Battery Saver Mode = Not Activated
• Reduced Engine Power = Not Activated
• Ignition Voltage = Greater than 5.5 V
• Throttle Actuator Control System = Not Activated

DTC runs continuously when the above conditions are met.

P2176

• Ignition Voltage = Greater than 6.4 V
• Reduced Engine Power = Not Activated
• Throttle Position Learn = Active

DTC runs continuously when the above conditions are met for greater than 2 s.