Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P0685, P0686, P0687
Commanded state does not match the actual state - For greater than 2 s
P0689
Engine Controls Ignition Relay Feedback Circuit = Less than 5 V - For greater than 5 s
P0690
Engine Controls Ignition Relay Feedback Circuit = Greater than 4 V - For greater than 5 s
P1682
The following parameters are not within 3 V of each other:
- Ignition 1 Signal
- Engine Controls Ignition Relay Feedback Signal
- Engine Controls Ignition Relay Feedback 2 Signal