LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Terrain Denali, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Automatic Transmission - 6T40 (MNH MNK) Or 6T45 (MHG) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Mount Strut Bracket Replacement (Front Wheel Drive) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Transmission Mount Strut Bracket And Bolts
    GM4597569Courtesy of GENERAL MOTORS COMPANY
  1. Position the transmission mount strut bracket (3) to the transmission.
  2. Install the four NEW transmission mount strut bracket to transmission bolts (2) and tighten to 100 N.m (74 lb ft) plus 60 to 75 degrees.
  3. Install the transmission mount strut bracket to transmission mount strut bolt (1) and tighten to 80 N.m (59 lb ft) plus 45 to 60 degrees.
  4. Lower the vehicle. Lifting and Jacking the Vehicle