LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Terrain Denali, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Automatic Transmission - 6T40 (MNH MNK) Or 6T45 (MHG) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Manual Shift Shaft And Seal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Manual Shaft Seal Installation Tool
    GM2079287Courtesy of GENERAL MOTORS COMPANY
  1. Install the manual shaft seal (1) using DT-49101  seal installer.
  2. Install the manual shaft and position switch assembly. Refer to Manual Shift Detent Lever with Shaft Position Switch Assembly Replacement .
  3. Install the battery tray. Refer to Battery Tray Replacement .
scientia non olet · About LEMON Manuals