Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P0850, P0851
- Engine Torque=Greater than 75 Nm (55 lb ft)
- Internal Mode Switch=Reverse GearorForward Gear
- Park/Neutral Position Switch=Park/Neutral
- Throttle Position=Greater than 10%
- Vehicle Speed=Greater than 10 km/h (6 MPH)
The above conditions must occur for greater than 1 s.
P0852
- Park/Neutral Position Switch=In Gear &
- Internal Mode Switch=ParkorNeutral
The above conditions must occur for greater than 1 s.