LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Terrain Denali, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 21 (Automatic Transmission - 6T40 (MNH MNK) Or 6T45 (MHG) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> 3-5-Reverse And 4-5-6 Clutch Housing Assemble >> Turbine Shaft Installation

Turbine Shaft Installation

WARNING: This page is about a different variant/trim than selected.
Fig 1: View Of Turbine Shaft
GM1891372Courtesy of GENERAL MOTORS COMPANY
Turbine Shaft Installation

Callout Component Name
1 Turbine Shaft
2 Turbine Shaft Retainer Ring
NOTE:

Do not re-use the turbine shaft retainer ring.


Special Tools 
GE 5586-A  Snap Ring Pliers or equivalent
For equivalent regional tools, refer to Special Tools .
scientia non olet · About LEMON Manuals