LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Terrain Denali, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 1.5L (LYX)) >> Repair Instructions - On Vehicle >> Hydraulic Valve Lash Adjuster Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove Hydraulic Valve Lash Adjuster Arm Replacement 
    2. Fig 1: Hydraulic Valve Lash Adjuster
    GM3982783Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Many internal engine components will develop specific wear patterns on their friction surfaces. Components MUST be separated, marked, or organized in a way to ensure installation to their original location and position. Take precautions in order to prevent interchanging of parts.

  2. Tag or mark each part immediately when removed. Indicate location, direction, or orientation when necessary.
  3. Remove Hydraulic Valve Lash Adjuster (1)[16x]
scientia non olet · About LEMON Manuals