LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Terrain Denali, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 1.5L (LYX)) >> Repair Instructions - On Vehicle >> Hydraulic Valve Lash Adjuster Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Hydraulic Valve Lash Adjuster
    GM3982783Courtesy of GENERAL MOTORS COMPANY
  1. Install the 16 hydraulic valve lash adjusters (1) in the bores in the cylinder head.
  2. Apply lubricant to the 16 hydraulic valve lash adjusters (1). Adhesives, Fluids, Lubricants, and Sealers .
  3. Install Hydraulic Valve Lash Adjuster Arm Replacement 
scientia non olet · About LEMON Manuals