LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Terrain Denali, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 1.5L (LYX)) >> Repair Instructions - On Vehicle >> Engine Oil Level Indicator Control Module Wiring Harness Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection (KL9)
  2. Remove Lower Oil Pan - Lower Oil Pan Replacement 
  3. Fig 1: Electrical Connector
    GM4597714Courtesy of GENERAL MOTORS COMPANY
  4. Disconnect Electrical Connector (1) @Engine Oil Level Indicator Control Module Wiring Harness
  5. Fig 2: Electrical Connector And Wiring Harness Retainer
    GM4597718Courtesy of GENERAL MOTORS COMPANY
  6. Disconnect Electrical Connector (1) @ Oil Pump Flow Control Solenoid Valve
  7. Remove { If equipped }Wiring Harness Retainer (2)
  8. Fig 3: Wiring Harness Connector Bolt
    GM4597727Courtesy of GENERAL MOTORS COMPANY
  9. Remove Wiring Harness Connector Bolt (1)
  10. Remove Engine Oil Level Indicator Control Module Wiring Harness