LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Terrain Denali, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 1.5L (LYX)) >> Repair Instructions - On Vehicle >> Engine Mount Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Engine Mount Bolt
    GM4847332Courtesy of GENERAL MOTORS COMPANY
  1. Install Engine Mount (4)
    2. CAUTION:

    Fastener Caution

  2. Install Engine Mount Bolt (1) and tighten 100 N.m (74 lb ft)
    3. CAUTION:

    Torque-to-Yield Fastener Caution

  3. Install NEW Engine Mount Engine Side Bolt (2, 3)
  4. Engine Mount Engine Side Bolt (2) - Tighten
    1. First Pass:35 N.m (26 lb ft)
  5. Engine Mount Engine Side Bolt (3) - Tighten
    1. First Pass:35 N.m (26 lb ft)
  6. Engine Mount Engine Side Bolt (2, 3) - Tighten
    1. Second Pass:100 N.m (74 lb ft)
    2. Final Pass:60 - 75 degrees - EN-45059  Angle Meter
    7. Fig 2: Engine Mount Brace And Bolt
    GM4597428Courtesy of GENERAL MOTORS COMPANY
  7. Install Engine Mount Brace (2)
  8. Install Engine Mount Brace Bolt (1) and tighten 22 N.m (16 lb ft)
  9. Install Engine Support Fixture - Engine Support Fixture 
  10. Install Air Cleaner Assembly - Air Cleaner Assembly Replacement
  11. Install Intake Manifold Cover - Intake Manifold Cover Replacement 
scientia non olet · About LEMON Manuals