LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Terrain Denali, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 1.5L (LYX)) >> Repair Instructions - On Vehicle >> Engine Lift Rear Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Engine Wiring Harness Bracket And Engine Lift Bracket
    GM4594305Courtesy of GENERAL MOTORS COMPANY
  1. Install the engine lift bracket (3) then install the engine wiring harness bracket (2).
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install Engine Lift Bracket Bolt (1) and tighten 25 N.m (18 lb ft)
    3. Fig 2: Engine Wiring Harness Bracket Bolt And Charge Air Cooler Outlet Air Tube
    GM4594288Courtesy of GENERAL MOTORS COMPANY
  3. Install Engine Wiring Harness Bracket Bolt and tighten 10 N.m (89 lb in)
  4. Install Charge Air Cooler Outlet Air Tube - Charge Air Cooler Outlet Air Tube Replacement
scientia non olet · About LEMON Manuals