Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P0201, P0202, P0203, P0204
Control circuit = Open - For greater than 1 s
P0261, P0264, P0267, P0270
Control circuit - Low = Short to Ground - For greater than 1 s
P0262, P0265, P0268, P0271
Control circuit - Low = Short to Voltage - For greater than 1 s
P1248, P1249, P124A, P124B
Control Circuit Shorted to Control Circuit - For greater than 1 s
P2147, P2150, P2153, P2156
Control circuit - High = Short to Ground - For greater than 1s
P2148, P2151, P2154, P2157
Control circuit - High = Short to Voltage - For greater than 1 s