LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Terrain Denali, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Controls And Fuel - 1.5L (LYX) - Diagnostic Information And Procedures (P0010 - P034B)) >> Diagnostic Information And Procedures >> DTC P0102 Or P0103: Mass Air Flow Sensor Frequency >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

P0102 

The ECM detects that the MAF Sensor signal parameter is less than 1, 825 Hz (about 0.37 g/s) for at least 250 cylinder firing events.

P0103 

The ECM detects that the MAF Sensor signal parameter is at least 8, 712 Hz (about 280 g/s) for at least 250 cylinder firing events.