Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
DTC P0068
- Engine speed is at least 800 RPM.
- Ignition voltage is at least 6.4 V.
The DTC runs continuously when the above conditions are met.
DTC P1101
- DTC P0101, P0102, P0103, P0107, P0108, P0111, P0112, P0113, P0116, P0117, P0118, P0128, P0335, or P0336 is not set
- Engine speed is between 400 - 6, 100 RPM
- Engine coolant temperature (ECT) is between -7 to +125°C (+19 to +257°F).
- Intake air temperature (IAT) is between -20 to +125°C (-4 to +257°F).
The DTC runs continuously when the above conditions are met.