LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Terrain Denali, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Controls And Fuel - 1.5L (LYX) - Repair Instructions) >> Repair Instructions >> Fuel Injector Wiring Harness Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Fuel Injectors, Wiring Harness And Tie Straps
    GM3982080Courtesy of GENERAL MOTORS COMPANY
  1. Connect the fuel injector wiring harness connectors (2) to the fuel injectors (3).
  2. Position the fuel injector wiring harness to the fuel injection fuel rail and install NEW wiring harness tie straps (1).
    3. Fig 2: Fuel Injector Wiring Harness, Connector And Tie Strap
    GM3982086Courtesy of GENERAL MOTORS COMPANY
  3. Connect the fuel injector wiring harness connector (1) to the fuel injection fuel rail fuel pressure sensor.
  4. Install a NEW wiring harness tie strap (1).
  5. Clip the fuel injector wiring harness (3) to the fuel injection fuel rail.
  6. Install Fuel Injection Fuel Rail Assembly - Fuel Injection Fuel Rail Assembly Replacement 
scientia non olet · About LEMON Manuals