LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Terrain Denali, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Primary Latch Release Cable Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Air Inlet Grille Panel
    GM4565830Courtesy of GENERAL MOTORS COMPANY
  1. Remove Air Inlet Grille Panel (1) - Air Inlet Grille Panel Replacement .
    2. Fig 2: Cable End Retainer And Hood Primary Latch Release Cable
    GM4565698Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the cable end retainer (1) from the latch.
  3. Release the hood primary latch release cable (3) from the retainers (2).
    4. Fig 3: Hood Primary Latch Release Cable
    GM4565700Courtesy of GENERAL MOTORS COMPANY
  4. Disconnect the hood primary latch release cable (1) from the inside handle. Hood Primary Latch Release Cable Handle Replacement 
    5. Fig 4: Hood Primary Latch Release Cable Grommet And Retainer
    GM4565702Courtesy of GENERAL MOTORS COMPANY
  5. Disconnect the hood primary latch release cable grommet (1) from the plenum upper panel.
  6. Release the hood primary latch release cable from the retainer (2).
  7. Attach mechanics wire to the cable and pull the cable out.
scientia non olet · About LEMON Manuals