LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Terrain Denali, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Primary Latch Release Cable Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Hood Primary Latch Release Cable Grommet And Retainer
    GM4565702Courtesy of GENERAL MOTORS COMPANY
  1. Attach the mechanics wire to the new cable and guide the cable in.
  2. Connect the hood primary latch release cable grommet (1) to the plenum upper panel.
  3. Attach the hood primary latch release cable to the retainer (2).
    4. Fig 2: Hood Primary Latch Release Cable
    GM4565700Courtesy of GENERAL MOTORS COMPANY
  4. Connect the hood primary latch release cable (1) to the inside handle. Hood Primary Latch Release Cable Handle Replacement 
    5. Fig 3: Cable End Retainer And Hood Primary Latch Release Cable
    GM4565698Courtesy of GENERAL MOTORS COMPANY
  5. Attach the hood primary latch release cable (3) to the retainers (2).
  6. Connect the cable end retainer (1) to the latch.
    7. Fig 4: Air Inlet Grille Panel
    GM4565830Courtesy of GENERAL MOTORS COMPANY
  7. Install Air Inlet Grille Panel(1) -Air Inlet Grille Panel Replacement .
scientia non olet · About LEMON Manuals