Shock Absorber Replacement (Left Side LWN without ZR2)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Lifting and Jacking the Vehicle Emission Reduction Fluid Tank Replacement
1	Rear Shock Absorber Lower Nut CAUTION: Refer to Fastener Caution . Procedure Support the rear axle with a hydraulic transmission stand.
2	Rear Shock Absorber Upper Bracket Bolt Procedure Tighten 115 N.m (85 lb ft)
3	Rear Shock Absorber Bottom Bolt Procedure Tighten 160 N.m (118 lb ft)
4	Rear Shock Absorber